After a minute or two of googling, I found this post that makes it sound
like XScale is ARM (unless the poster is wrong?).
http://unix.derkeiler.com/Mailing-Lists/FreeBSD/arch/2004-11/0120.html

There's a FreeBSD/arm mailing list here:
http://www.daemonnews.org/mailinglists/FreeBSD/freebsd-arm/.. 

The problem is that I'm not sure of what it would take to actually do a
cross compile...  I've learned most of what I know about building things on
FreeBSD by looking at Chris's great developers guide (I still refer back to
it regularly!).  

Paul

-----Original Message-----
From: Jonathan De Graeve [mailto:Jonathan dot De dot Graeve at imelda dot be] 
Sent: Thursday, March 02, 2006 10:03 AM
To: Paul Taylor
Cc: m0n0wall dash dev at lists dot m0n0 dot ch
Subject: RE: [m0n0wall-dev] FreeBSD and Intel xscale

I have a netgear FVS338 which lacks good VPN support (which it is
designed for) and would like to use that one but I never done cross
compiling.

J.

-- 
Jonathan De Graeve
Network/System Administrator
Imelda vzw
Informatica Dienst
+32 15/50.52.98
jonathan dot de dot graeve at imelda dot be

---------
Always read the manual for the correct way to do things because the
number of incorrect ways to do things is almost infinite
---------

> -----Oorspronkelijk bericht-----
> Van: Paul Taylor [mailto:PaulTaylor at winn dash dixie dot com]
> Verzonden: donderdag 2 maart 2006 16:01
> Aan: Jonathan De Graeve
> Onderwerp: RE: [m0n0wall-dev] FreeBSD and Intel xscale
> 
> 
> I know in the past that several people have raised the possibility of
> running Monowall on other processors, such as the one powering the
Linksys
> WRT54G units...  I didn't think cross-compiling was practical,
though...
> 
> What vendor uses the Intel XScale and how hard would it be to compile
it
> for
> that platform?
> 
> Paul
> 
> -----Original Message-----
> From: Jonathan De Graeve [mailto:Jonathan dot De dot Graeve at imelda dot be]
> Sent: Thursday, March 02, 2006 9:39 AM
> To: m0n0wall dash dev at lists dot m0n0 dot ch
> Subject: [m0n0wall-dev] FreeBSD and Intel xscale
> 
> Anybody want to compile a m0n0wall version for Intel XScale?
> 
> J.
> 
> --
> Jonathan De Graeve
> Network/System Administrator
> Imelda vzw
> Informatica Dienst
> +32 15/50.52.98
> jonathan dot de dot graeve at imelda dot be
> 
> ---------
> Always read the manual for the correct way to do things because the
> number of incorrect ways to do things is almost infinite
> ---------
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash dev dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash dev dash help at lists dot m0n0 dot ch
>