[ previous ] [ next ] [ threads ]
 
 From:  "Bernie O'Connor" <Bernie dot OConnor at sas dot com>
 To:  "Jonathan De Graeve" <Jonathan dot De dot Graeve at imelda dot be>
 Cc:  <m0n0wall dash dev at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall-dev] Radius Mac Authentication failure with IAS
 Date:  Thu, 4 May 2006 09:34:20 -0400
I would suggest don't translate to upper case.  Cisco Radius server accepts what m0n0wall sends (my
m0n0wall is sending lowercase) and does not translate.  I would agree that the chosen style should
be used for all the data sent by the system.  The choices you've programmed seem very flexible to
me. 

If I'm reading the correct RFC ( http://www.faqs.org/rfcs/rfc2486.html ) the prohibited characters
for the Network Access Identifier are:

special     = "<" / ">" / "(" / ")" / "[" / "]" / "\" / "."
                  / "," / ";" / ":" / "@" / %x22  / Ctl



-----Original Message-----
From: Jonathan De Graeve [mailto:Jonathan dot De dot Graeve at imelda dot be] 
Sent: Thursday, May 04, 2006 5:17 AM
To: Jonathan Karras; m0n0wall at lists dot m0n0 dot ch
Cc: Lloyd Palfrey; m0n0wall dash dev at lists dot m0n0 dot ch
Subject: RE: [m0n0wall-dev] Radius Mac Authentication failure with IAS

> I would say all uppercase. I think my RADIUS server converts thing to 
> all uppercase anyway. I don't have a real preference.
> 
> As for the change for no real reason. If someone has a database
already
> created one way they wouldn't have to change. Say moving from MAC auth 
> on the WAP to CP MAC auth.
> 

In my situation its lowercase :(

Can anybody please investigate this on his own radius systems?

If necessary I also add a uppercase/lowercase switch in the advanced setup page defaulting to what
most users have.

J.


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash dev dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash dev dash help at lists dot m0n0 dot ch