[ previous ] [ next ] [ threads ]
 From:  "Alex M" <radiussupport at lrcommunications dot net>
 To:  "'Jim Thompson'" <jim at netgate dot com>
 Cc:  "Mono Dev List" <m0n0wall dash dev at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall-dev] WRAP hardware for people working on 6.1 port
 Date:  Mon, 28 Aug 2006 22:19:17 -0400
Ok I can test the board and I2C under Linux, but you should tell me how can
I get (or where can I get) PCI to I2C adapter for my desktop?

As to the array of LEDs I thought about that ... this would be useful for
outdoor CPE so you can see the signal strengths of wireless signal etc... I
can do that too after I have LCD model and after I have more budget for

As to the speaker, I think I can add it, but can you tell me why do we need

-----Original Message-----
From: Jim Thompson [mailto:jim at netgate dot com] 
Sent: Monday, August 28, 2006 10:09 PM
To: Alex M
Cc: Mono Dev List
Subject: Re: [m0n0wall-dev] WRAP hardware for people working on 6.1 port

On Aug 28, 2006, at 3:58 PM, Alex M wrote:

> Ok what I have under development now is 2 or 4 lines LCD w/  
> backlight + n
> numbers of control buttons all this seats on I2C bus.
> I need help w/ 2 stages:
>     1. Driver for BSD for I2C
>     2. Actual Module for Mono to do configuration and output things.

At the risk of pissing-off everyone here, I think the first thing to  
do is to make this hw work under linux, where there
is a mostly complete i2c bus driver.

that way we know the hw works.  I'm not impinging on your ability,  
but the number of times I've had to deal with slightly wonky to
fully-broken hardware in my career is higher than I'd like.   (You  
can't begin to enumerate my grey hair.)

rather than a full-on LCD, I could see applications for an array of  
LEDs or a pizeo-electric speaker.


To unsubscribe, e-mail: m0n0wall dash dev dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash dev dash help at lists dot m0n0 dot ch