[ previous ] [ next ] [ threads ]
 
 From:  "bino-psn" <bino at indoakses dash online dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] pb11r409 released
 Date:  Tue, 10 Jun 2003 10:22:42 +0700
Dear All.
I just downloaded this new release and it booted on my standard PC.
This is my first success boot on standard PC anyway. Thx

question : what eth card that by default is supported by this release ? it
couldn't find my RTL8139C eth card.

Sincerely
-bino-
----- Original Message -----
From: "Manuel Kasper" <mk at neon1 dot net>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Monday, June 09, 2003 8:11 PM
Subject: [m0n0wall] pb11r409 released


> Hi folks,
>
> pb11r409 is up; we now finally have a "generic-pc" image that works like
> the net45xx image but can be used on any standard PC that is supported by
> FreeBSD (may also include some other embedded products). The image can be
> flashed to a CF card or written to an IDE hard disk (with physdiskwrite
> 0.3). This makes Michael Iedema's work obsolete - he agreed to this,
> though, and tested the image (r404, actually), and said it worked the way
> it should. Of course, the webGUI firmware upgrade facility can be used,
> too.
>
> Other changes between r401 and r409:
>
> - fixed bootloader for net45xx to work with some CF cards that would
> otherwise produce read errors on boot (suggested/contributed by
> Dirk-Willem van Gulik) - those with a known-broken card please check and
> report if the fix didn't solve this
>
> - watchdog support added for net45xx platform (watchdogd userland program
> by Dirk-Willem van Gulik). This means that the system will be reset if it
> has been hung for 32 seconds (as experienced by a userland program)
>
> - JavaScript bug fixed on the traffic shaper: edit page
>
> I haven't had much time to test this release thoroughly, but as the
> changes were relatively small, I expect it to work properly. Now it's your
> turn to test. :)
>
> Greets,
>
> Manuel
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>