[ previous ] [ next ] [ threads ]
 
 From:  "V. de Bel" <vincent dot debel at wanadoo dot nl>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] PC1<>LAN1<>MONO<>LAN2<>PC2
 Date:  Thu, 19 Jun 2003 22:52:45 +0200
Hmm, next try :(

1)
    I hope you unticked "Block private networks" in your WAN configuration

2)
    To ping the m0n0wall make new Firewall rule:

        Proto: ICMP    Source: *    Port: *    Destination: *    Port: *




----- Original Message ----- 
From: "Joe Doran" <joe at jbdww dot com>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, June 19, 2003 10:29 PM
Subject: [m0n0wall] PC1<>LAN1<>MONO<>LAN2<>PC2


> Here is my situation.
>  
> 1)
> PC1<>LAN1<>MONO<>LAN2<>PC2
>  
> PC1 = 192.168.6.60.
> LAN1 = 192.168.6.254 / 24 Configure as LAN on M0N0Wall.
> LAN2 = 192.168.4.65 /24 Configure as WAN on M0N0Wall. The gateway is
> 192.168.4.254.
> PC2 = 192.168.4.55
>  
> Lan 2 has a Linksys setup as the gateway to the internet.
>  
> I setup a NAT on the M0N0wall to forward port 80 to 192.168.6.60 on PC1.
> When I site on PC2 and point my web browser to 192.168.4.65, it never
> connects.
>  
> I have put the M0N0wall on to the internet, and I do know that NATing
> does work, but why does this not work on the local lan.
>  
> 2)
> I take it you can not ping M0N0wall on its WAN connection.
>  
> 3)
> I put a pc on the DMZ side with and address of 192.168.9.50 with
> M0N0wall DMZ set to 192.168.9.250 and I try to use the ping function in
> M0N0wall to ping 192.168.9.50 and I get time outs.
>  
> Thanks
> Joe Doran
>