[ previous ] [ next ] [ threads ]
 From:  "Joe Doran" <joe at jbdww dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] PC1<>LAN1<>MONO<>LAN2<>PC2
 Date:  Thu, 19 Jun 2003 15:59:37 -0500
I am going to try some experiments and see what I come up with.

-----Original Message-----
From: V. de Bel [mailto:vincent dot debel at wanadoo dot nl] 
Sent: Thursday, June 19, 2003 3:53 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] PC1<>LAN1<>MONO<>LAN2<>PC2

Hmm, next try :(

    I hope you unticked "Block private networks" in your WAN

    To ping the m0n0wall make new Firewall rule:

        Proto: ICMP    Source: *    Port: *    Destination: *    Port: *

----- Original Message ----- 
From: "Joe Doran" <joe at jbdww dot com>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, June 19, 2003 10:29 PM
Subject: [m0n0wall] PC1<>LAN1<>MONO<>LAN2<>PC2

> Here is my situation.
> 1)
> PC1<>LAN1<>MONO<>LAN2<>PC2
> PC1 =
> LAN1 = / 24 Configure as LAN on M0N0Wall.
> LAN2 = /24 Configure as WAN on M0N0Wall. The gateway is
> PC2 =
> Lan 2 has a Linksys setup as the gateway to the internet.
> I setup a NAT on the M0N0wall to forward port 80 to on
> When I site on PC2 and point my web browser to, it never
> connects.
> I have put the M0N0wall on to the internet, and I do know that NATing
> does work, but why does this not work on the local lan.
> 2)
> I take it you can not ping M0N0wall on its WAN connection.
> 3)
> I put a pc on the DMZ side with and address of with
> M0N0wall DMZ set to and I try to use the ping function
> M0N0wall to ping and I get time outs.
> Thanks
> Joe Doran

To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch