[ previous ] [ next ] [ threads ]
 
 From:  Christiaens Joachim <jchristi at oce dot be>
 To:  "'Alagu Sankar'" <alaguv at realnetsi dot com>, m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] 16 MB RAM
 Date:  Thu, 23 Oct 2003 11:06:31 +0200
I have tried it with 24MB of RAM and had problems too... The menu came up
eventually, but nothing worked as it should.

Another system with 74MB is doing fine...

Joachim

-----Original Message-----
From: Alagu Sankar [mailto:alaguv at realnetsi dot com]
Sent: woensdag 22 oktober 2003 22:16
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] 16 MB RAM


I am trying to use m0n0wall generic PC version on an x86 based hardware with
only 16MB RAM and 8MB CF.  I am getting some Page Fault (trap 12) as soon as
the kernel boots up.  Just wondering if anybody has used it with similar
configuration.  FYI i am using the rootfs-pb18r522.tar.gz as a base root
filesystem and building my own kernel image based on FreeBSD 4.8 RELEASE.
m0n0wall hackers guide has been of great help in building my own image. Now
i have a standard PC for PXE boot and a target platform for CF boot.

Sankar

----- Original Message -----
From: "Tracy Phillips" <tracy dot phillips at weberize dot com>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Wednesday, October 22, 2003 9:15 AM
Subject: [m0n0wall] PorSentry Feedback


Hi,



I would like to know what the list would think about implementing portsentry
into m0n0wall?



http://www.freebsddiary.org/portsentry.php



Psionic was purchased by Cisco so the link referenced in the article above
will lead you to Cisco.



This is from the readme of portsentry:



PortSentry is part of the Abacus Project suite of tools. The Abacus

Project is an initiative to release low-maintenance, generic, and reliable

host based intrusion detection software to the Internet community. More

information can be obtained from http://www.psionic.com.



PortSentry has a number of options to detect port scans, when it finds one
it

can react in the following ways:



            - A log indicating the incident is made via syslog()

            - The target host is automatically dropped into /etc/hosts.deny

              for TCP Wrappers

            - The local host is automatically re-configured to route all

              traffic to the target to a dead host to make the target system

              disappear.

            - The local host is automatically re-configured to drop all

              packets from the target via a local packet filter.





The purpose of this is to give an admin a heads up that their host is

being probed. There are similar programs that do this already (klaxon,

etc.) We have added a little twist to the whole idea (auto-blocking), plus

extensive support for stealth scan detection.



--



I think this would be a great tool to be implemented on a firewall
(obviously Cisco does as well). It's a fairly lightweight program so it
should not take up much room.



I would like to get some feedback on the subject





Tracy Phillips



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


-----------------------------------------------
MISSION STATEMENT 
-----------------------------------------------

effectively by offering innovative print and document management products
and services for professional environments.

-----------------------------------------------
DISCLAIMER 
-----------------------------------------------
This e-mail message and any attachment are intended for the sole use of the
recipient(s) named above and may contain information which is confidential
and/or protected by intellectual property rights.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form) by
other persons than the designated recipient(s) is prohibited.

If you have received this e-mail in error, please notify the sender either
by telephone (0032-2-729.48.11) or by e-mail and delete the material from
any computer.
Oce-Belgium/Oce-Interservices is nor responsible for the correct and
complete transfer of the contents of the sent e-mail, neither for the
receipt on due time.  This e-mail message does not bring about a contractual
obligation for Oce-Belgium/Oce-Interservices.

Thank you for your cooperation.

For further information about Oce-Belgium/Oce-Interservices please see our
website at www.oce.be

-----------------------------------------------