[ previous ] [ next ] [ threads ]
 
 From:  Jim Gifford <baadpuppy at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Can't connect
 Date:  Sun, 17 Oct 2004 18:53:16 -0400
Ok, what Bryan was saying is that your m0n0wall WAN IP address and
your upstream gateway address that m0n0wall uses as the default route
to the internet need to be in the same IP subnet.

With the address of 213.215.114.87/27, your upstream gateway device
needs to be an address between 213.215.114.65 and 213.215.114.94
excluding 213.215.114.87.  You tried setting it to 213.215.114.1 which
would require a /24 netmask for the public interface.  Setting it to
the internal interface IP means you are trying to tell m0n0wall that
your default interface to the internet is to your internal interface. 
This doesn't make sense.

This is a simple routing issue.  Your ISP should be able to assist you
with getting this part of it working.

Hope this helps,
Jim Gifford


On Sun, 17 Oct 2004 22:59:51 +0200, Peter Parnican <peter at procad dot sk> wrote:
> Ok, what i did now,
> my NIC is set to 192.168.100.87, mask 255.255.255.224, and gateway is the
> LAN  IP of monowall 192.168.100.100 ...is it OK?
> 
> Now are both mask same and still nothing.  (i can ping the monowall from lan
> without problem, PLS. try ping my public IP 213.215.114.87...)
> 
> any idea?  (when i set all settings from my provider without monowall its
> working without problems...)
> 
> 
> 
> 
> ----- Original Message -----
> From: "Bryan Brayton" <bryan at sonicburst dot net>
> To: "Peter Parnican" <peter at procad dot sk>; <m0n0wall at lists dot m0n0 dot ch>
> Sent: Sunday, October 17, 2004 10:23 PM
> Subject: RE: [m0n0wall] Can't connect
> 
> It appears that your gateway address and WAN IP aren't in the same
> subnet (at least not with a /27 mask).  So, either your .87 wan ip is
> wrong, your .1 gateway is wrong, or you've got the wrong mask.
> 
> -Bryan
> 
> > -----Original Message-----
> > From: Peter Parnican [mailto:peter at procad dot sk]
> > Sent: Sunday, October 17, 2004 3:33 PM
> > To: m0n0wall at lists dot m0n0 dot ch
> > Subject: [m0n0wall] Can't connect
> >
> > Hi guys, please help me... im lost with config of monowall. I cant
> pass my
> > internet conection throught monowall.
> > (ill spend today with it 8hours... im going crazy :-(  )  ..im almost
> sure
> > im doing somethings very stupid.
> >
> > ...all info and my settings are here http://www.monowall.procad.sk/
> (it
> > will
> > be used for documetation, PLEAS help!)
> >
> > thanks in advance, peter
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> 
> ________________________________
> 
> avast! Antivirus <http://www.avast.com> : Outbound message clean.
> 
> Virus Database (VPS): 0442-3, 10/15/2004
> Tested on: 10/17/2004 4:23:31 PM
> avast! - copyright (c) 2000-2004 ALWIL Software.
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>