[ previous ] [ next ] [ threads ]
 
 From:  "James W. McKeand" <james at mckeand dot biz>
 To:  "'marin blu'" <marinblu0000 at yahoo dot com>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Help to settinng up m0n0 with isdn router
 Date:  Tue, 19 Oct 2004 09:50:43 -0400
On Interfaces -> WAN page, clear the check on the "Block private
networks".

_________________________________
James W. McKeand

-----Original Message-----
From: marin blu [mailto:marinblu0000 at yahoo dot com] 
Sent: Monday, October 18, 2004 5:33 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] Help to settinng up m0n0 with isdn router

Hi,

I want to add m0n0 at the following working
configuration:

 wan(213.x.x.x)
 |
 router
 |
 internal(192.168.0.100)

 and nat enable at 192.168.0.0.

The following configuration is the current situation
and I can not pass internet traffic in the internal
net, but i can ping from internal the wan ip and from
router the internal net:
 wan(213.x.x.x) 
 |
 router
 |
 eth0 (192.168.2.100)
 |
 fw wan (192.168.2.101)
 |
 fw lan (192.168.0.90)
 |
 internal (192.168.0.x)

Could you please inform me what static routes I have
to create ?
Also, do I have to disable Router NAT and enable fw
NAT ?
What else do I have to take care ?


Marin


		
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail 

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch