[ previous ] [ next ] [ threads ]
 
 From:  Ron Rosson <ron at oneinsane dot net>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Should work?
 Date:  Fri, 29 Oct 2004 23:12:56 -0700
I am using m0nowall on a 4501 with a supported prism2 PCI based card. I also
have an SMC Access point located out of distance from the soekris device. What I
was thinking that if I I plugged the SMC into the unused sis2 port and then
bridged that with the PCI based prism2 interface it should work. and should have
to only apply one set of rules for both the SMC AP and the prism2 interface on
the soekris.

TIA
-Ron

--
Ron Rosson
ron at oneinsane dot net