Let the magic shaper do the work on the LAN interface and do the
shaping for IPs/subnets on the WAN. Create a new pipe with a desirable
speed, assign a queue and create a rule on the WAN for your IP/subnet.

Hynek



On Wed, 10 Nov 2004 18:27:45 +0100, Tom Obermayr <to at bla dot net> wrote:
> hi,
> 
> I've got m0n0wall 1.2b2 installed and working fine with the magic shaper
> traffic shaper settings. now in addition to those general settings there is
> a group of IPs that I'd like to limit to xx kbit/s up/down bandwidth.
> 
> other IPs should be able to use whatever bw is there, but this group should
> never be allowed more than a specified amount.
> 
> I know there are a ton of traffic shaper help messages already, but setting
> this up is kinda confusing for a lot of ppl (including myself), and for
> someone in the know this probably takes 2 minutes to reply with the correct
> settings ;))
> 
> thanks, tom.
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> 


-- 
Hynek Cihlar