[ previous ] [ next ] [ threads ]
 
 From:  sai <list at ebs dot net dot pk>
 To:  Graham Dunn <gdunn at inscriber dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Can only get m0n0 to work on a hard reboot with soekris 4501
 Date:  Mon, 29 Nov 2004 14:11:36 +0500
I got a Kingston 128M card (also gives me some Toshiba ) and that works 
fine. I used it on a standard PC, with a USB to CF card convertor.

sai

Graham Dunn wrote:
>  From the archives, this looks to be something about the type of CF card 
> you have in the unit.
> 
> Who has a make of CF that has worked with no issues? I'm using a 
> Kingston labelled 128M card that appears in the 4501 BIOS as
> 
> Pri Mas  TOSHIBA THNCF128MMG             LBA 978-8-32  125 Mbyte
> 
> but will only boot into mono after a power cycle (no luck with reboot 
> from mono or the BIOS).
> 
> Thanks,
> Graham
> 
> Just for reference, the boot screen looks like:
> 
> comBIOS ver. 1.26a  20040819  Copyright (C) 2000-2004 Soekris Engineering.
> 
> net45xx
> 
> 0064 Mbyte Memory                        CPU 80486 133 Mhz
> 
> Pri Mas  TOSHIBA THNCF128MMG             LBA 978-8-32  125 Mbyte
> 
> Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int
> -------------------------------------------------------------------
> 0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000
> 0:18:0 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0000000 10
> 0:19:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0001000 11
> 0:20:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0002000 05
> 
> 1 Seconds to automatic boot.
> 
> No Boot device available, enter monitor.
> 
> 
> comBIOS Monitor.   Press ? for help.
> 
>  >
> 
> 
> ------------------------------------------------------------------------
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch