Hi List,

I am having a hard time trying to set up a IPSec VPN Tunnel between a
m0n0wall System with a static IP and an Linksys Router BEFVP41 with
built in IPSec Support (Real Support not pass thru) with a dynamic IP.

LinkSys 192.168.0.1/255.255.255.0 (Dynamic IP) -> m0n0wall (Static IP)
10.0.0.0/255.255.255.0

Now :
1) Does anyone have this kind of Setup working (is it possible)?

2) What do I have to do on the m0n0 wall.  I tried setting up a tunnel,
but m0n0wall needs a ip adress of the remote gateway and that IP will
change every 24 hours so no use doing that.

3) I set up the mobile clients settings in m0n0wall as described in the
FAQ, but when I try to create a tunnel from the LinkSys it can not
connect and on the m0n0wall I get the following errors:
Nov 29 16:20:00 racoon: INFO: isakmp.c:1368:isakmp_open():
10.0.0.252[500] used as isakmp port (fd=10) 
Nov 29 16:20:00 racoon: INFO: isakmp.c:1368:isakmp_open():
194.25.116.182[500] used as isakmp port (fd=9) 
Nov 29 16:20:00 racoon: INFO: isakmp.c:1368:isakmp_open():
217.6.73.190[500] used as isakmp port (fd=8) 
Nov 29 16:20:00 racoon: INFO: isakmp.c:1368:isakmp_open():
127.0.0.1[500] used as isakmp port (fd=7) 
Nov 29 16:20:00 racoon: INFO: main.c:175:main(): @(#)This product linked
OpenSSL 0.9.7d 17 Mar 2004 (http://www.openssl.org/) 
Nov 29 16:20:00 racoon: INFO: main.c:174:main(): @(#)internal version
20001216 sakane at kame dot net Nov 29 16:20:00 racoon: INFO:
main.c:172:main(): @(#)package version freebsd-20040617a 
Nov 29 16:19:59 racoon: INFO: session.c:180:close_session(): racoon
shutdown Nov 29 16:19:58 racoon: INFO: session.c:299:check_sigreq():
caught signal 15

Now I am a total newbie to IPSec / VPN.  I read thru the FAQ as well as
searched the mailinglist, but found now answers.

Any help would be appreciated.

TIA
Patrick W. Fraley