Because the address you enter must be a "network address" corresponding
to a /28 subnet. These are:
.0
.16
.32

Etc.

Try .208 or .224, either of those will work.

Josh McAllister

-----Original Message-----
From: Patrick W. Fraley [mailto:pf at comsulting dot de] 
Sent: Monday, December 06, 2004 7:13 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] PPTP AdressRange

Hi List,

I have setup a vpn using the pptp daemon on a m0n0wall 1.1 System. 
Everything seems to be working ok, with one oddity:

When I try to set the adressrange to 10.0.0.210, m0n0 always sets it to
10.0.0.8.  Now (if my math is not wrong;) 210 should work fine (210 + 16
= 226 < 254).  So why can I not set the remote adressrange to 210?  My
LAN is setup as 10.0.0.0/255.255.255.0.

What am I doing wrong?

Please help.

TIA
Patrick



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch