|
||||||||
Sorry, correction, you need to auth using an external pptp server, not the m0n0 pptp server ... -----Original Message----- From: Barry Mather [mailto:barry dot mather at dorecentres dot com dot au] Sent: Tuesday, 14 December 2004 8:19 AM To: m0n0wall at lists dot m0n0 dot ch Subject: RE: [m0n0wall] m0n0wall questions Hopefully I can shed a little light on some of the questions ... Dns : In general setup there is a tick box that states Allow DNS server list to be overridden by DHCP/PPP on WAN If this option is set, m0n0wall will use DNS servers assigned by a DHCP/PPP server on WAN for its own purposes (including the DNS forwarder). They will not be assigned to DHCP and PPTP VPN clients, though. Make sure it is ticked Pptp vpn, yes, you can have more than 16 users, just do not use the built in m0n0 authentication system, use the radius auth. There is lots of info on this list about using radius to auth against windows accounts. File access: check your mtu settings, are you at 1500 ?? drop it down to something like 1496, not sure how much more you;ll need to drop it as I'm not really upto speed with pptp packet headers .. To run command line on m0n0, http://m0n0.ip.address/exec.php cheers Barry -----Original Message----- From: Zsolt J. MArcsev [mailto:zsolt dot j at marcsev dot hu] Sent: Tuesday, 14 December 2004 3:04 AM To: m0n0wall at lists dot m0n0 dot ch Subject: [m0n0wall] m0n0wall questions Hi Everybody, I have also chosen M0n0wall (wrap-1.2b2.img) on which I am running WRAP. So far I am really satisfied with it. The data for my present question: m0n0wall address: 10.36.1.10 The DNS Services (these are integrated into Windows 2003 AD) <dnsserver>10.36.1.22</dnsserver> <dnsserver>10.36.1.32</dnsserver> The forwarding is set to m0n0wall (10.36.1.10) on these DNS servers. The PPTP (VPN) functoin is set, the VPS server's address is 10.36.1.15. My questions: 1.) On vpn connections the addresses given by the dhcp the dns names are not 10.36.1.22 and 10.36.1.32 but the m0n0wall's own dns address (10.36.1.10), pointing to external addresses, so the vpn client (a Windows XP) cannot resolve the internal addresses. What settings do you advise? 2.) Is it possible to use more than 16 VPN channels (i would need 23). 3.) The VNC and RDP speed is fast enough, but the windows file access and the running of applications is pretty slow. Can this be speeded up? What I would also like to accomplish is the support of no-ip.com, proxy function (the proxy cache and log can go to the external machine just like the server log does) I have searched for a description of command of hidden xml config file, but not found it. Thank you in advance Zsolt J. Marcsev Zsolt dot j at marcsev dot hu Dore Achievement Centres (Pty) Ltd - Hotline: 1300 55 77 11 www.dorecentres.com.au This e-mail message may contain confidential or privileged information and is intended solely for the individual to whom it is addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. If you have received it in error please notify us immediately by telephoning 1300 55 77 11 and destroy this e-mail and any attachments. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. The content of this email is not necessarily that of the Dore Acievement Centres unless otherwise specified. This email was scanned for possible viruses and was sent on 14/12/2004 by barry dot mather at dorecentres dot com dot au to m0n0wall at lists dot m0n0 dot ch --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |