[ previous ] [ next ] [ threads ]
 
 From:  Simon SZE-To <simonchs at gmail dot com>
 To:  Levi <lgmasterson at gmail dot com>
 Cc:  M0N0WALL <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Problems with 1:1 NAT
 Date:  Tue, 14 Dec 2004 07:46:42 +0800
hello,

i'm getting the same problem with you few days ago, and the problem
gone after i wait for few hours. this may casued by your ISP router
cached the ARP table.

maybe you can try to wait or ask your ISP clear the ARP table.


On Mon, 13 Dec 2004 10:30:51 -0600, Levi <lgmasterson at gmail dot com> wrote:
> Hello.
> 
> I'm attempting to set up 1:1 NAT for one host inside my network.  I
> have a block of 12 static IP's alloctated to me by my ISP, and the
> goal is to have outbound traffic from this host appear to come from
> one of the static IP's.
> 
> The problem is this: when I configure ProxyARP and 1:1 NAT as I think
> it should work, the host no longer has any access to the internet.
> 
> This is what I have going right now (simplified):
> 
> (host 10.100.4.11)
> |
> |
> [m0n0 lan 10.100.4.1/net 24.33.44.100]
> |
> |
> <internet>
> 
> And I'm shooting for inbound traffic to 24.33.44.101 to go to
> 10.100.4.11 and outbound traffic from 10.100.4.11 to appear to come
> from 24.33.44.101.
> 
> I know the documentation says that by default no inbound traffic is
> allowed over the 1:1 NAT mapping, but does that apply for outbound
> traffic as well?
> 
> --Levi
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>