[ previous ] [ next ] [ threads ]
 From:  Chris Buechler <cbuechler at gmail dot com>
 To:  "Daniel L. Hunter" <dhunter at techmethods dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Server NAT - What am I doing wrong???
 Date:  Mon, 20 Dec 2004 12:41:56 -0500
On Mon, 20 Dec 2004 12:29:59 -0500, Daniel L. Hunter
<dhunter at techmethods dot com> wrote:
> I've been working on this all weekend and it's driving me nuts.  I've gone
> through the archives and followed every string related to this but can't get
> this to work.  Here's my setup:
> DSL Router IP:
> Laptop IP:
> M0n0Wall WAN IP:
> M0n0Wall LAN IP:
> Web Server Behind m0n0wall:
> All I want to do is to be able to access the web server from my laptop.  I
> can access the internet from the web server machine.  I can access a web
> site if I'm behind the firewall using  So I know connectivity
> is not a problem and the web server is working properly.
> So I configured Server NAT like so:
> External IP Address:
> Description:  HTTP on Weaver
> I then go into Inbound and configure it like this:
> If: WAN
> Proto: TCP
> Ext. port range: 80(HTTP)
> NAT IP: (ext.:
> Int. port range: 80(HTTP)
> Description: Weaver Web
> Auto-add a firewall rule...: checked
> So m0n0wall adds the following rule:
> Proto:  TCP
> Source: *
> Port: *
> Destination:
> Port: 80(HTTP)
> Description: NAT Weaver Web
> But I get nothing when I try to hit the web server from my laptop.  What am
> I missing?

You have "block private networks" on the WAN unchecked?