|
||||||||
Hi, im doing (testing - experimenting with mono) similar thing now. I have 2 PC and m0n0. Easiest way how to do it is: (my case, speed change up to You...) 1, create a pipe 1 and set bandwith 32kbit (delay is empty, mask nono... desc. up to You) 2, create a rule: Pipe 1, Interface LAN, Protocol ANY, Source ANY, Port ANY, Destination: Single host - IP which You want regulate, Dest. ANY, Direction ANY. Now You can try download some file from that IP, You will see the speed at the Traffic Graph. Then we can add next IP: 1, create a pipe 2 and set bandwith 64kbit (delay is empty, mask nono... desc. up to You) 2, create a rule: Pipe 1, Interface LAN, Protocol ANY, Source ANY, Port ANY, Destination: Single host - IP which You want regulate, Dest. ANY, Direction ANY. Now You can try download some file from that IP, You will see the speed at the Traffic Graph. If You have two PC, try downloading some files from PC 1 and check the TrafficGraf, You will see the speed 32kbit, Then start downloading on the second PC and check the traffic. You will see the speed 32+64 = 96kbit... It was simple example, but its working. If You need diferent speed for upload and download you shoud set more pipes.. for download and then for upload. Very good is Magic Shaper Wizard, try this...You can lern from it... peter ----- Original Message ----- From: "jes" <jes at poczta dot onet dot pl> To: <m0n0wall at lists dot m0n0 dot ch> Sent: Wednesday, January 05, 2005 5:46 PM Subject: [m0n0wall] traffic shaping how to? Hello. i have 640/160kbits connection, i installed monowall and would like to serup traffic shaping like that: 192.168.0.11 limit to 240/30kbits 192.168.0.22 limit to 240/30kbits 192.168.0.44 limit to 100/50kbits 192.168.0.55 no limits 192.168.0.66 limit to 100/100kbits i dont know how to configure like that and second qquestion is can i disable all p2p traffic for example on 192.168.0.33 pleas help me ----- Original Message ----- From: "jes" <jes at poczta dot onet dot pl> To: <m0n0wall at lists dot m0n0 dot ch> Sent: Wednesday, January 05, 2005 5:46 PM Subject: [m0n0wall] traffic shaping how to? Hello. i have 640/160kbits connection, i installed monowall and would like to serup traffic shaping like that: 192.168.0.11 limit to 240/30kbits 192.168.0.22 limit to 240/30kbits 192.168.0.44 limit to 100/50kbits 192.168.0.55 no limits 192.168.0.66 limit to 100/100kbits i dont know how to configure like that and second qquestion is can i disable all p2p traffic for example on 192.168.0.33 pleas help me |