[ previous ] [ next ] [ threads ]
 
 From:  "Danny Puckett" <dpuckett at comresource dot com>
 To:  "Danny Puckett" <dpuckett at comresource dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Routing over IPSEC
 Date:  Fri, 28 Jan 2005 14:18:45 -0500
That should read 192.168.3.0 to 192.168.100.0  Sorry

> -----Original Message-----
> From: Danny Puckett [mailto:dpuckett at comresource dot com]
> Sent: Friday, January 28, 2005 2:07 PM
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: [m0n0wall] Routing over IPSEC
> 
> I have a config as show below.  I have an IPSEC tunnel
> From m0n0wall1 to m0n0wall2.  The 192.168.2.0 and the 192.168.3.0
> Networks can see each other.  How do I enable the 192.168.3.0 and
> 192.168.200.0 networks see each other.  There does not seem to be
> A way to add a static route for that subnet to route across the tunnel
> 
> 
>          -----------                        -----------
>         |           |                      |           |
>         | m0n0wall1 |INETIP1--------INETIP2| m0n0wall2 |
>         |           |                      |           |
>          -----------                        -----------
>          192.168.2.1                        192.168.3.1
>               |                                   |
>               |                                   |
>               |                                   |
>               |
>          192.168.2.2                        192.168.3.x
>          -----------
>         |           |
>         |  ISA2004  |
>         |           |
>          -----------
>        192.168.100.254
>               |
>               |
>               |
>         192.168.100.1
>          -----------
>         |           |
>         |  W2K3DNS  |
>         |           |
>          -----------
smime.p7s (4.0 KB, application/x-pkcs7-signature)