I decided to just install a zip drive since I had to reboot anyway to update 
my config.

Jan 31 15:04:01/kernel: afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at 
ata1-slave PIO0
Jan 31 15:04:01/kernel: acd0: CDROM <CRD-8480C> at ata1-master PIO4
Jan 31 15:04:01/kernel: ad0: 6149MB <QUANTUM FIREBALL EX6.4A> [13328/15/63] 
at ata0-master PIO4

it looks like it can see it.  eventually I'll try to boot from it.

-Rob


----- Original Message ----- 
From: "Chris Buechler" <cbuechler at gmail dot com>
To: "Robert Staph" <rstaph at digitalimpreza dot com>
Cc: <m0n0wall at lists dot m0n0 dot ch>
Sent: Monday, January 31, 2005 3:12 PM
Subject: Re: [m0n0wall] M0n0wall from a IDE zip drive


> On Mon, 31 Jan 2005 12:10:18 -0500, Robert Staph
> <rstaph at digitalimpreza dot com> wrote:
>> Is anyone out there running m0n0wall from an IDE zip drive?  Is it 
>> possible?
>> (I don't have a machine with a zip drive to try it on)
>>
>
> There was a missing /dev device required to make zip drives work on
> the most recent release and first couple 1.2 betas, IIRC.  Somebody
> posted a fix to the list, and Manuel said it would be in the next
> release.  I believe that next release was 1.2b3, but I again could be
> wrong.  This all from memory and was quite a while back.  I'd say with
> the most current beta, yes, it should work.  Search the list archives
> to make sure I'm not dreaming this up.  :)
>
> -Chris
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>