Here is my status.php
xl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1<RXCSUM>
inet 64.207.38.2 netmask 0xfffffff0 broadcast 64.207.38.15
ether 00:50:da:d6:56:95
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
so I ran the following on the exec.php page:
/sbin/ifconfig xl2 64.207.38.4 netmask 0xfffffff0 alias
and got the following:
$ /sbin/ifconfig xl2 64.207.38.4 netmask 0xfffffff0 alias
ifconfig: ioctl (SIOCAIFADDR): File exists
-----Original Message-----
From: Robert Staph [mailto:rstaph at digitalimpreza dot com]
Sent: Wednesday, February 09, 2005 8:16 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] Problems using multiple IP addresses on m0n0wall
goto your-mono-ip/status.php and look in the "interfaces" section and make
sure its aliased the other external IPs on the WAN interface. I'm guessing
you're using the generic-pc m0n0wall image?
example from my config:
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet x.y.z.202 netmask 0xfffffff8 broadcast x.y.z.207
inet x.y.z.203 netmask 0xffffffff broadcast x.y.z.203
inet x.y.z.204 netmask 0xffffffff broadcast x.y.z.204
inet x.y.z.205 netmask 0xffffffff broadcast x.y.z.205
inet x.y.z.206 netmask 0xffffffff broadcast x.y.z.206
ether 00:10:18:0b:68:91
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
if you don't have more than just one line here, goto your-mono-ip/exec.php
and enter:
/sbin/ifconfig bge0 x.y.z.a netmask 255.255.255.255 alias
(replacing the bge0 with your WAN interface name and the x.y.z.a with one of
your external IPs that isn't working)
Now if everything works fine with that IP address, the fix is to edit your
conifg.xml by hand and to add something like:
<shellcmd>/sbin/ifconfig bge0 x.y.z.a netmask 255.255.255.255
alias</shellcmd>
(again, replacing the bge0 with your WAN interface name and the x.y.z.a with
one of your external IPs. repeat as needed and make sure to place these
<shellcmd></shellcmd> lines somewhere in the <system></system> area.
-Rob
----- Original Message -----
From: "Travis Zadikem" <tzadikem at picosecond dot com>
To: "Monowall (E-mail)" <m0n0wall at lists dot m0n0 dot ch>
Sent: Wednesday, February 09, 2005 10:01 AM
Subject: [m0n0wall] Problems using multiple IP addresses on m0n0wall
> Can someone please tell me why m0n0wall 1.11 is having problems with my
> multiple IP addresses?
> I have DNS setup with 2 IP address (64.207.38.4 and 64.207.38.2) My main
> WAN IP address on our firewall
> is 64.207.38.2
> In the aliases on the firewall I have the following:
> mail 64.207.38.4 Mail1
> web 64.207.38.2 Mail2
>
> My NAT has the following:
>
> WAN TCP 25 (SMTP) 192.168.1.160
> (ext.: 64.207.38.4) 25 (SMTP) SMTP to Mail2
> WAN TCP 25 (SMTP) 192.168.1.55 25 (SMTP)
> WAN TCP 80 (HTTP) 192.168.1.160 80 (HTTP)
> WAN TCP 110 (POP3) 192.168.1.55 110 (POP3)
> WAN TCP 443 (HTTPS) 192.168.1.160 443 (HTTPS) Webmail on new mail
> server
> WAN TCP/UDP 143 (IMAP) 192.168.1.55 143 (IMAP)
>
> Externally I can telnet to port 25 of 64.207.38.2 and it works just fine.
> I
> can
> not telnet to port 25 of 64.207.38.4 or port 110 or port 143 but I can
> from
> inside the firewall. What appears to be the problem??
>
> Travis
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch | 