[ previous ] [ next ] [ threads ]
 
 From:  Chris Buechler <cbuechler at gmail dot com>
 To:  "Kim C. Callis" <kim dot callis at gmail dot com>
 Cc:  m0n0wall ML <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Help with static routing
 Date:  Fri, 18 Feb 2005 15:02:47 -0500
On Thu, 17 Feb 2005 23:46:21 -0800, Kim C. Callis <kim dot callis at gmail dot com> wrote:
> I have a M0n0box on the 172.16.8.0 network... I have another network
> connected to another network (192.168.1.1) that needs to access the 172
> network. On the 192 network, I have set up a static route to the 172
> side. Do I need to add a static route on the monowall side to the 192
> side?

Yes, unless it's reachable through the default gateway of the WAN.  


> I tried that previously, and the monowall side was serving up DHCP
> addresses when I ran a cable from the monowall switch down to a switch
> that was connected to the 192 side. I only want access to a few hosts on
> the 172 side, so is there some way on the mono side to limit what the
> 192 side has access to?
> 

Appropriate rules on the appropriate interface would accomplish this. 
Which interface is appropriate depends on what is plugged in where.

Some sort of diagram might be helpful if this doesn't help.  

-Chris