[ previous ] [ next ] [ threads ]
 From:  Don Munyak <dmunyak at p dash a dash link dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Compaq Desktop, same as in the gallery
 Date:  Tue, 22 Feb 2005 16:24:18 -0500
I also came across this link as well.


James W. McKeand wrote:

> Flemming Munk Jensen wrote:
>>It must be an "IDE to Compact Flash adaptor".
>>I got mine here : http://www.danbit.dk/produkter/0904.phtml
> It looks like a CFDISK.1D from pcengines
> (http://www.pcengines.ch/cflash.htm). The pcengines page shows a
> standard HD power connector, the adaptor is also available with a
> floppy power connector.
> The disassembly of a HD may not necessary, the hole placement
> (according to pcengines) is the same as the holes on the bottom of a
> HD. You would need to use nuts and bolts (or metal MB stand-offs and
> nuts)- obviously the holes in the board are not threaded... 
> But, this also assumes that the HD mounting bracket in the PC allows
> for screws from bottom...
> _________________________________
> James W. McKeand
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


This message, including files attached to it, may contain confidential
information that is intended only for the use of the ADDRESSEE(S) named
above.  If you are not an intended recipient, you are hereby notified that
any dissemination or copying of the information contained in this message,
or the taking of any action in reliance upon the information, is strictly
prohibited.  If you have received this message in error, please notify the
sender immediately and delete the message from your system.  Thank you.