I'm experiencing the identical problem as Richard Davis (25 Feb).
On my new WRAP.1D-2 with wrap-1.11.img written with physdiskwrite-0.5 to my 
64MB CF, I'm getting:

01F0 Master 848A SanDisk SDCFB-64
Phys C/H/S 490/8/32 Log C/H/S 490/8/32
Console: internal video/keyboard
BIOS drive C: is disk0
BIOS 640kB/130048kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8
(root at nb dot neon1 dot net, Sat May 29 16:40:46 CEST 2004)
/kernel text=0x182a80 data=0x1d66c+0x1ae38 syms=[0x4+0x28650+0x4+0x2f688]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
ØØØØØØxØ..ØxØØØ.ØØØØØ.xØØxx.x.x.x....xx.....Ø..xØØØx.Ø..Ø..Øx.Øx.Ø.ØØ.xØ.x..ØØØ


Interestingly, when I try it without the CFC installed, I get:

01F0 - no drive found !
No boot device available, press Enter to continue.
PC Engines WRAP.1C v1.03
640 KB Base Memory
130048 KB Extended Memory

which would suggest that the BIOS is for the 1C, not my 1D card.  I don't
know if this is a problem or not.


Another question I have is the startup.  According to paragraph 4.2.4 of
the QuickStart document, I should be getting something that looks like this:

PC Engines WRAP platform
tinyBIOS V1.4a (C)1997-2003 PC Engines
640 KB Base Memory
64512 KB Extended Memory
01F0 Master 848A HYPERSTONE FLASH DISK
Phys C/H/S 497/4/32 Log C/H/S 31/32/63
WRAP setup
(9) 9600 baud *3* 38400 baud
(C) CHS mode *L* LBA mode
WRAP router platform 9 9/26/04
(X) Xmodem upload (Q) Quit


I don't get anything that looks like that, either with or without the CFC
installed.  What gives?

BTW, it would be helpful in the quickstart to mention the name of a
terminal emulator program or two under Linux.  It's been a while since I
had cause to use one, and it took me a while to remember that they're
called 'minicom' and 'seyon'.

NHA
-- 
Norman H. Azadian    Taegerishalde 13    CH-3110 Muensingen    Switzerland
norman at azadian dot ch      tel: +41 31 721 7855      fax: +41 31 55 898 55