On Thu, 3 Mar 2005 17:02:45 -0000, Frans King <frans dot king at f333 dot net> wrote:
>
>
> Is this an acknowledged problem with 1.2b6? I timeouts from XP clients and
> the pptp server shows nothing in the logs so I assume pptp traffic is being
> blocked. Do I now need to open some ports on the WAN interface?
>
A whole lot of us are having some sort of problems with it. It's not
the traffic getting dropped, I can telnet to 1723 on my m0n0 box, but
PPTP won't successfully connect. Full logs from mpd from a single
connection attempt from an XP client at the bottom of this message.
Client gets error 619.
-Chris
Mar 3 15:31:59 mpd: mpd: PPTP connection from 64.112.XX.62:48877
Mar 3 15:31:59 mpd: pptp0: attached to connection with 64.112.XX.62:48877
Mar 3 15:31:59 mpd: [pt0] IFACE: Open event
Mar 3 15:31:59 mpd: [pt0] IPCP: Open event
Mar 3 15:31:59 mpd: [pt0] IPCP: state change Initial --> Starting
Mar 3 15:31:59 mpd: [pt0] IPCP: LayerStart
Mar 3 15:31:59 mpd: [pt0] IPCP: Open event
Mar 3 15:31:59 mpd: [pt0] bundle: OPEN event in state CLOSED
Mar 3 15:31:59 mpd: [pt0] opening link "pt0"...
Mar 3 15:31:59 mpd: [pt0] link: OPEN event
Mar 3 15:31:59 mpd: [pt0] LCP: Open event
Mar 3 15:31:59 mpd: [pt0] LCP: state change Initial --> Starting
Mar 3 15:31:59 mpd: [pt0] LCP: LayerStart
Mar 3 15:31:59 mpd: [pt0] device: OPEN event in state DOWN
Mar 3 15:31:59 mpd: [pt0] attaching to peer's outgoing call
Mar 3 15:31:59 mpd: [pt0] device is now in state OPENING
Mar 3 15:31:59 mpd: [pt0] device: UP event in state OPENING
Mar 3 15:31:59 mpd: [pt0] device is now in state UP
Mar 3 15:31:59 mpd: [pt0] link: UP event
Mar 3 15:31:59 mpd: [pt0] link: origination is remote
Mar 3 15:31:59 mpd: [pt0] LCP: Up event
Mar 3 15:31:59 mpd: [pt0] LCP: state change Starting --> Req-Sent
Mar 3 15:31:59 mpd: [pt0] LCP: phase shift DEAD --> ESTABLISH
Mar 3 15:31:59 mpd: [pt0] LCP: SendConfigReq #21
Mar 3 15:31:59 mpd: ACFCOMP
Mar 3 15:31:59 mpd: PROTOCOMP
Mar 3 15:31:59 mpd: MRU 1500
Mar 3 15:31:59 mpd: MAGICNUM adaa1ec4
Mar 3 15:31:59 mpd: AUTHPROTO CHAP MSOFTv2
Mar 3 15:31:59 mpd: MP MRRU 1600
Mar 3 15:31:59 mpd: MP SHORTSEQ
Mar 3 15:31:59 mpd: ENDPOINTDISC [802.1] 00 00 24 c0 97 74
Mar 3 15:31:59 mpd: [pt0] error writing len 42 frame to bypass: Can't
assign requested address
Mar 3 15:31:59 mpd: pptp0-0: ignoring SetLinkInfo
Mar 3 15:32:01 mpd: [pt0] LCP: SendConfigReq #22
Mar 3 15:32:01 mpd: ACFCOMP
Mar 3 15:32:01 mpd: PROTOCOMP
Mar 3 15:32:01 mpd: MRU 1500
Mar 3 15:32:01 mpd: MAGICNUM adaa1ec4
Mar 3 15:32:01 mpd: AUTHPROTO CHAP MSOFTv2
Mar 3 15:32:01 mpd: MP MRRU 1600
Mar 3 15:32:01 mpd: MP SHORTSEQ
Mar 3 15:32:01 mpd: ENDPOINTDISC [802.1] 00 00 24 c0 97 74
Mar 3 15:32:01 mpd: [pt0] error writing len 42 frame to bypass: Can't
assign requested address
Mar 3 15:32:03 mpd: [pt0] LCP: SendConfigReq #23
Mar 3 15:32:03 mpd: ACFCOMP
Mar 3 15:32:03 mpd: PROTOCOMP
Mar 3 15:32:03 mpd: MRU 1500
Mar 3 15:32:03 mpd: MAGICNUM adaa1ec4
Mar 3 15:32:03 mpd: AUTHPROTO CHAP MSOFTv2
Mar 3 15:32:03 mpd: MP MRRU 1600
Mar 3 15:32:03 mpd: MP SHORTSEQ
Mar 3 15:32:03 mpd: ENDPOINTDISC [802.1] 00 00 24 c0 97 74
Mar 3 15:32:03 mpd: [pt0] error writing len 42 frame to bypass: Can't
assign requested address
Mar 3 15:32:05 mpd: [pt0] LCP: SendConfigReq #24
Mar 3 15:32:05 mpd: ACFCOMP
Mar 3 15:32:05 mpd: PROTOCOMP
Mar 3 15:32:05 mpd: MRU 1500
Mar 3 15:32:05 mpd: MAGICNUM adaa1ec4
Mar 3 15:32:05 mpd: AUTHPROTO CHAP MSOFTv2
Mar 3 15:32:05 mpd: MP MRRU 1600
Mar 3 15:32:05 mpd: MP SHORTSEQ
Mar 3 15:32:05 mpd: ENDPOINTDISC [802.1] 00 00 24 c0 97 74
Mar 3 15:32:05 mpd: [pt0] error writing len 42 frame to bypass: Can't
assign requested address
Mar 3 15:32:07 mpd: [pt0] LCP: SendConfigReq #25
Mar 3 15:32:07 mpd: ACFCOMP
Mar 3 15:32:07 mpd: PROTOCOMP
Mar 3 15:32:07 mpd: MRU 1500
Mar 3 15:32:07 mpd: MAGICNUM adaa1ec4
Mar 3 15:32:07 mpd: AUTHPROTO CHAP MSOFTv2
Mar 3 15:32:07 mpd: MP MRRU 1600
Mar 3 15:32:07 mpd: MP SHORTSEQ
Mar 3 15:32:07 mpd: ENDPOINTDISC [802.1] 00 00 24 c0 97 74
Mar 3 15:32:07 mpd: [pt0] error writing len 42 frame to bypass: Can't
assign requested address | 