[ previous ] [ next ] [ threads ]
 From:  Flemming Munk Jensen <flemming at postboksen dot dk>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] 8Mb CF card too small for 1.2bx ?
 Date:  Fri, 04 Mar 2005 15:42:47 +0100
Flemming Munk Jensen wrote:

> I have just successfully written m0n0wall v1.2b6 to my CF card, using 
> a CF card reader and Physdiskwite v0.5
> When i get home, i will imidiately plug it into my m0n0wall and report 
> back what the result of this stunt is :-)

Semisuccessfull will be the apropiate term to use i think :-/
The wall boots, and look like it is working "Out of the box", but i see 
several errors and/or weird stuff in /var/log/dmesg.boot that i dont 

When i try to get my Captive Portal up and running again, it will not 
Auth me when i try to log in.
Wether or not this is because Captive portal have changed in 
functionality or not is unexamined by me at the moment.

Here are the whole file - i hope it is ok to post it here...

$ cat /var/log/dmesg.boot
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Feb 25 21:22:37 CET 2005
    root at daemon5 dot neon1 dot net:/m0n0wall/kernels/generic-pc
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C3 Samuel 2 (533.08-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x673  Stepping = 3
real memory  = 117374976 (111 MB)
avail memory = 88489984 (84 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.16.INTA
$PIR: No matching entry for 0.16.INTB
$PIR: No matching entry for 0.16.INTC
$PIR: No matching entry for 0.16.INTD
$PIR: No matching entry for 0.18.INTA
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 15 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Actiontec Electronics product 0x6106, rev 1.10/1.32, addr 2
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
device 17.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem 0xe7400000-0xe74000ff irq 15 at
device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:63:da:67:b4
dc0: <ADMtek AN985 10/100BaseTX> port 0xe400-0xe4ff mem 0xe7401000-0xe74013ff irq 11 at device 20.0
on pci0
miibus1: <MII bus> on dc0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:10:a7:17:8f:62
dc0: if_start running deferred for Giant
cpu0 on motherboard
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 533079796 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
IP Filter: v3.4.35 initialized.  Default = block all, Logging = enabled
md0: Preloaded image </mfsroot> 16777216 bytes at 0xc097a598
ad0: 7MB <SanDisk SDCFB-8/vdd 1.00> [245/2/32] at ata0-master BIOSPIO
Mounting root from ufs:/dev/md0


No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.0 - Release Date: 02-03-2005