We Śre using these apliances FWAP-3680 with a different, or adopted 1.2b3 of
Everything is working fine, never had any problems.
Am 09.03.2005 8:36 Uhr schrieb "Bernd Holzinger" unter
<bernd underscore holzinger at t dash online dot de>:
>> >Has anyone had any experiences running 1.11 on "ANY" Advantech
>> >hardware? Particularly the FWA-3680 appliance.
> we use a FWAP-3680 from www.ipc2u.de which seems to have the same
> motherboard inside (NOVA-7898). It has 2 Intel ethernet ports on board
> and 2 mini PCI slots for LM-102N-X59 ethernet cards with 2 Intel ports
> each. As hard disk we use a 16MB flash IDE-drive (MDM-16/40-V). The
> cpu is a 1GHz P3 which is total overkill because we don't use ipsec.
> RAM is 256MB.
> We have lots of these appliances installed with 4 and 6 ports. All are
> working like a charm. No problems since 9 months with mono 1.1 and
> later 1.11, 1.2b never tried.
> You can replace one (!) of the Intel cards with a Broadcom 5701/5703
> 1GB card (also available as 2 port) but we've never tried this one.