Finally got it... it seems that my initial configuration (except for the dmz 
interface configuration) is correct, however i had made a configuration 
error on the DMZ switch :-/

Thank you for you help... :-)

/Allan

-----Original Message-----
From: Chris Buechler <cbuechler at gmail dot com>
To: Allan Mogensen <allan at 1966 dot dk>
Cc: m0n0wall at lists dot m0n0 dot ch
Date: Wed, 16 Mar 2005 13:50:09 -0500
Subject: Re: [m0n0wall] DMZ and public ip problem

> On Wed, 16 Mar 2005 14:28:54 +0100, Allan Mogensen <allan at 1966 dot dk>
> wrote:
> > Okay, i'm a bit confused how to set the DMZ interface ip... if i want
> to use
> > the 83.90.91.241, would it then be 83.90.91.241/31 or ??
> > 
> 
> No, the subnet mask on your old firewall should be 255.255.255.240. 
> So it's 83.90.91.241/28.
> 
> Your actual net block is 83.90.91.240/28, but the .240 is the network
> address and isn't a usable IP (think of it as the IP 192.168.1.0 in a
> /24).
> 
> You don't put the network subnet on the DMZ interface, you put the IP
> address of the interface and the appropriate subnet mask.
> 
> -Chris
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>