[ previous ] [ next ] [ threads ]
 From:  "C. Falconer" <cfalconer at avonside dot school dot nz>
 To:  'Chris Buechler' <cbuechler at gmail dot com>, 'Kenneth Dalbjerg' <kenneth at dalbjerg dot nu>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] m0n0Wall inside VMWare
 Date:  Mon, 21 Mar 2005 15:29:15 +1200
Yes - autodetect doesn't work under vmware, because vmware does not
disconnect the cable from the virtual card... It simply disconnects the
virtual card from the virtual machine.... So m0n0wall doesn't see that
ethernet card go from Connected to Not Connected.

-----Original Message-----
From: Chris Buechler [mailto:cbuechler at gmail dot com] 
Sent: Monday, 21 March 2005 2:27 p.m.
To: Kenneth Dalbjerg
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] m0n0Wall inside VMWare

On Sun, 20 Mar 2005 16:46:03 +0100, Kenneth Dalbjerg <kenneth at dalbjerg dot nu>
> Hello
> I know that this subject har been up before, but i can't get it to 
> work.
> I have 3 Interface:
> /dev/vmnet2 - WAN
> /dev/vmnet3 - Private Lan
> /dev/vmnet4 - DMZ Lan
> I use vlance as my Adapter type, iam running VMWare un a linux 
> maschine.
> I have downloade Chris buechler VMWare cd iso V1.11.
> Iam pressing 1 in the menu,
> n to VLAN.
> And then 'a' for auto-dection.
> Then i connect the adapter against my lan (dev/vmnet3) in vmware
> And then hit the enter, but then i says: No link-up dectected.

It doesn't detect link up because in VMware there is no link up.  The
interfaces on my images are already assigned as noted on my site (one of the
main reasons for distributing them is you know out of the box exactly what
interface is assigned to what).  Don't assign interfaces, just put the
interfaces on the VMnets you want them to be on.

VMware interface - Pre-assigned to
Ethernet 1 - LAN 
Ethernet 2 - WAN 
Ethernet 3 - OPT 


To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch