Were you unable to setup Server NAT or 1:1 NAT. Both are dicussed in
the documentation.


On Mon, 21 Mar 2005 13:36:30 +0100, Frank Luedke <frank at secudos dot de> wrote:
> 
>   Hi out there. I am trying to setup m0n0wall
>  using the following network stucture:
> 
>   <WAN> public IP 001.002.003.146/29
>   <LAN> private network 192.168.1.0/24
>   <OPT1> public IP 001.002.004.001/26
>   <OPT2> public IP 001.002.004.065/26
>   <OPT3> public IP 001.002.004.128/25
> 
>   LAN should be NATed to the outside, WAN has a
>  default gateway to 001.002.003.145.
> 
>   My problem is; its not working. I can reach
>  everything from LAN (OPT1-3 and WAN/Internet).
>  I am finally also able to PING a server in the
>  OPT1 network from WAN (I've created any<->any
>  rules on all interfaces) but I cannot open
>  web session using a browser or even with
>  telnet to a server in OPT1 on port 80.
> 
>   I've started an tcpdump on one server on OPT1
>  and I see that there are packets coming in and
>  going out but m0n0 seems either to rewrite the
>  packets or its maybe blocking some of the
>  packets?
> 
>   I've searched the mailing lists archive but all
>  I found that might help is that someone wrote
>  that its hard to set up such a configuration but
>  its working ...
> 
> Cheers,
>  Frank
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>