Here is the last line in dmesg.boot after a cold boot.

pccard: card removed, slot 0


Here is the system.log after a warm boot when everything works.  These are
missing during a cold boot

Mar 21 22:07:26 m0n0wall2k /kernel: pccard: card inserted, slot 0
Mar 21 22:07:26 m0n0wall2k /kernel: wi0 at port 0x240-0x27f irq 5 slot 0 on
pccard0
Mar 21 22:07:26 m0n0wall2k /kernel: wi0: 802.11 address: 00:02:6f:01:75:18
Mar 21 22:07:26 m0n0wall2k /kernel: wi0: using RF:PRISM2.5 MAC:ISL3873
Mar 21 22:07:26 m0n0wall2k /kernel: wi0: Intersil Firmware: Primary 1.01.01,
Station 1.05.06

-----Original Message-----
From: Email User [mailto:email at lvbugs dot com] 
Sent: Monday, March 21, 2005 1:26 PM
To: 'm0n0wall at lists dot m0n0 dot ch'
Subject: Wireless Card in PCMCIA/PCI Bridge 

I have a Senao 2511 PCCard in a Ricoh r5c475 based PCMCIA/PCI bridge.

When I first boot the machine I receive the following error when I navigate
to the wireless tab in the m0n0wall admin site.


wicontrol: SIOCGWAVELAN: Device not configured wicontrol: SIOCHOSTAP_GETALL:
Device not configured

 
A reboot from the admin site resolves any issue and the wireless works
without any trouble.

Is there a timeout that can be tweaked to allow the PCMCIA/PCI Bridge to
activate the card on the cold boot?