On Wed, 2003-12-03 at 17:14, Michael Sierchio wrote:
> Magne Andreassen wrote:
> > Alexandre Gambati wrote: 

> > hm, tried upgrading the firmware for this card?

some Cut & Paste from:

http://wleiden.webweaving.org:8080/svn/node-config/ops/papers/i368-hardware-considerations.txt

Versions:
- 1.3.2 ap-modus hangs after a while
- 1.4.2 buggy in ap-modus
- 1.4.9 no ap-modus
- 1.5.4 please tell me
- 1.5.6 runs apmodus, few error reports in ap modus, no hangs
- 1.7.1 please tell me
- 1.7.4 kismet reports it as an ap; ap-mode works using hostap-0.1.0
using linux; ap-mode doesn't work with FreeBSD 5.0 but does work with
5.1

I found the firmware here:
- http://www.netgate.com/support/prism_firmware/
- http://linux.junsun.net/intersil-prism/firmware/
- http://www.red-bean.com/~proski/firmware/

and
> D-Link 520+?
will not work... it has no prism chipset.

> Or possibly downgrading it? ;-)   
there's an general advice to not downgrade firmware,
but I have done it from 1.7.4. to 1.5.6
if you don't up/downgrade primairy firmware (current 1.1.1)
there is not much chance to ruin the card, but there is always a risk :)


regards 
Marten> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>