[ previous ] [ next ] [ threads ]
 
 From:  Punky Tse <punkytse at punknix dot com>
 To:  Michael Sierchio <kudzu at tenebras dot com>
 Cc:  mono <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] Intersil firmware upgrade -- add'l problem and some success
 Date:  Thu, 04 Dec 2003 09:48:46 +0800
Please try:
http://www.red-bean.com/~proski/firmware/1.4.9.tar.gz

There is a s1010409.hex firmware which should be good for 8008 cards. 
Firmware information could be found in:
http://linux.junsun.net/intersil-prism/index.html

You should also look for 1.5.6.tar.gz if you want 1.5.6 firmware.


Michael Sierchio wrote:

> Johnson, Scott wrote:
> 
>> The choice is easy.  We have over 7000 units out in the field using 
>> Intersil radios.  1.5.6 is the only stable version.
> 
> 
> Thanks all, 1.5.6 is working fine w/FreeBSD-4.9, and the
> Demarc card really does radiate more power.
> 
> Next problem:  I have some Netgear MA401 NICs, and using
> Winupdate failed due to the card rev being 8008, the
> earliest supported rev for the firmware .hex files being
> 800a or so.  Any suggestions on how I might find the
> appropriate files to upgrade these to 1.4.9?   Or am
> I going to be buying new wireless cards? ;-)
> 
> Cheers,
> 
> Michael
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 


-- 
Regards,
Punky
P U N K N ! X  . c o m
Technolog + Lifestyle
(http://www.punknix.com)