[ previous ] [ next ] [ threads ]
 From:  =?iso-8859-1?Q?Eleazar_Mart=EDnez?= <eleazar dot martinez at technosoft dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] NAT 1:1 problem
 Date:  Fri, 1 Apr 2005 12:19:11 -0600
>-----Original Message-----

>Sent: Friday, April 01, 2005 12:11 PM
>To: m0n0wall at lists dot m0n0 dot ch
>Subject: [m0n0wall] NAT 1:1 problem
>I'm trying to setup my m0n0 box as follows:
>OP1: IP
>I have a server in OP1 with the IP I want the 
>server to be
>accessible (all ports/protocols) from the WAN side at the 
>public ip address
> I add a NAT 1:1 on WAN with external 
> and internal
> Rules for the firewall on WAN permit traffic for 
> and on the OP1 I allow all traffic. My setup 
>doesn't seem to

I wrote it wrong here...
"Rules for the firewall on WAN permit traffic for destination"
The rule is to allow traffic for destination which is what
packets from the WAN will try to connect to.

>Without the addition of the OP1 interface everything works fine.
>On the WAN I have disabled the checkbox for "Block private networks".
>Do you see any problems with the above setup?
>Some extra fun that might be causing problems: from the WAN 
>side there will
>be coming packets from (thanks to a vpn router) 
>directed to
> Is this a problem because the packets will 
>'look' like they
>come from my LAN ( Do I have to tell it 
>somehow to not route
>those packets to the LAN but send them using NAT to OP1 (a static route
>maybe)? And, lastly, am I just trying to do something that 
>isn't possible
>with the packages that m0n0 uses internally?
>By the way... I don't need any connection between LAN and OP1 
>at all so it's
>ok if they cannot see each other.
>Thanks in advance.

>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch