[ previous ] [ next ] [ threads ]
 
 From:  toshiki at confero24 dot com
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Tested m0n0wall with Shellpack & SSH-Bear on net-4511
 Date:  Wed, 4 May 2005 06:35:50 -0400 (EDT)
BTW: the image I used is:
http://www.xs4all.nl/~fredmol/m0n0/ssh-shellpack-wrap-1.1.img

Toshiki

> Hello all,
>
> I tested Fred Mol's m0n0wall utils at http://www.xs4all.nl/~fredmol/m0n0/
> on net4511 and want to report my experience here.
>
> I installed on CF using the phydiskwrite.exe (0.5) on Windows.  The
> installation and operation worked flawlessly except my Senao
> PC-Card/PCMCIA.
>
> Thinks that worked well
> -----------------------
> -  Basic m0n0wall setup with interface config, DHCP config, webGUI etc -
> Could SSH to the net4511 w/o prob
> -  Senao Prism 2.5 mini-PCI card for 802.11b
> -  Soekris Hifn hardware VPN Accellerator loads (though not tested yet)
>
> # less /var/log/dmesg.boot | grep hifn
> hifn0 mem 0xa0002000-0xa0002fff,0xa0001000-0xa0001fff irq 11 at device
> 16.0 on pci0
> hifn0: Hifn 7951, rev 0, 128KB sram, 193 sessions
> #
>
> Things that are not working
> ----------------------------
> -  Senao Prism 3.0 PCMCIA for 802.11b with
>    1.1 Pri-FW
>    1.5.4 Sec-FW
>
> Does anyone have tips or pointers as to why my PCMCIA card doesn't work?
> My
> dmesg.boot says:
>
> # less /var/log/dmesg.boot | grep pccard
> pccard0: <PC Card 16-bit bus (classic)> on pcic0
> pccard: card inserted, slot 0
> pccard: card removed, slot 0
> pccard: card inserted, slot 0
>
> Any tips appreciated.
>
> Thank you
> Toshiki
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>