Eric Li wrote:
> Hi,
> 
> I'm a newbie to m0n0 and need some help with a new install with a 
> generic-pc img.
> 
> PC: Laptop Compaq M300 with onboard Intel Pro 100 ethernet (82557), no 
> other NIC connected
> 

I think you should get another nic to make this machine usefull.

> After the install I cannot ping outside from the m0n0 pc, neither can I 
> ping to the m0n0 box from another pc.
> 
> After a reboot the console says (not sure if this helps or not):
>   LAN IP address: 192.168.1.1
>   Port configuration:
>   LAN -> sis0
>   WAN -> sis1
> 
> I have tried 1.11 and currently on 1.2b7, no success with both, when I 
> tried the new ping host feature in the beta I get:

You must assign interfaces first.  Have you taken a look at the doc?

> 
> 192.168.1.1 (default ip of the local m0n0 box)
>    ping: sendto: No route to host
> 
> 192.168.1.10 (another pc)
>    ping: sendto: No route to host
> 
> 127.0.0.1
>    64 bytes from 127.0.0.1: icmp_seq_0 ttl=64 time=0.191ms
> 
> Is there any debug shell I can login to other than the console menu, 
> that will allow me to do some more testing of the install? Currently I 
> can't access anything other than the console menu.
> 
> I had ipcop on it previously, and the lan was working fine, so i think 
> the hardwares like cable/lan card are working properly
> 
> Many thanks in advance!
> 
> eric
> 
> _________________________________________________________________
> Be the first to hear what's new at MSN - sign up to our free 
> newsletters! http://www.msn.co.uk/newsletters