[ previous ] [ next ] [ threads ]
 From:  "KH Lau" <KH dot Lau at wongswec dot com>
 To:  "Eric Li" <ericli222 at hotmail dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] cannot connect to lan after install
 Date:  Sun, 15 May 2005 18:38:36 +0800
At least install two NIC's for the m0nowall please install one more NIC card
and assign the IP for WAN and LAN.

-----Original Message-----
From: Eric Li [mailto:ericli222 at hotmail dot com] 
Sent: Saturday, May 14, 2005 11:28 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] cannot connect to lan after install


I'm a newbie to m0n0 and need some help with a new install with a generic-pc

PC: Laptop Compaq M300 with onboard Intel Pro 100 ethernet (82557), no other
NIC connected

After the install I cannot ping outside from the m0n0 pc, neither can I ping
to the m0n0 box from another pc.

After a reboot the console says (not sure if this helps or not):
   LAN IP address:
   Port configuration:
   LAN -> sis0
   WAN -> sis1

I have tried 1.11 and currently on 1.2b7, no success with both, when I tried
the new ping host feature in the beta I get: (default ip of the local m0n0 box)
    ping: sendto: No route to host (another pc)
    ping: sendto: No route to host
    64 bytes from icmp_seq_0 ttl=64 time=0.191ms

Is there any debug shell I can login to other than the console menu, that
will allow me to do some more testing of the install? Currently I can't
access anything other than the console menu.

I had ipcop on it previously, and the lan was working fine, so i think the
hardwares like cable/lan card are working properly

Many thanks in advance!


Be the first to hear what's new at MSN - sign up to our free newsletters! 

To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch