On May 14, 2005, at 2:56 PM, Nick Ohanian wrote:

> Hi All - Would anybody have any suggestions on how to possible enable a
> PCMCIA wireless card on a net4521 box?  I unfortunately don't have a 
> serial
> cable handy and can only access the box via ip.  I'm trying to 
> determine how
> I can get a http://www.netgate.com/product_info.php?products_id=98 " 
> 802.11b
> Intersil 2.5 PCMCIA card, dual cables & 5 dBi omni ant." kit working 
> on the
> box.  I presumed I would just have to insert the PCMCIA card into the 
> slot
> and everything should come up via the system / wireless settings.  Has
> anybody ran into anything like this before?  Thanks in advance. -nick

I just tried it here on the 4501 (*).   You'll need to assign the 
interface, but after that it should be
straight-forward.

OK, I used a 2511CD+ (not an EXT2), but the differences are not 
software visible.

jim

(*) http://www.m0n0.ch/wall/gallery/jim_thompson/Image.jpg