|
||||||||
Just found this link http://www.vonage.com/help_knowledgeBase_article.php?article=452 Do you suppose it would be better to just put an opt-1 interface on the firewall and allow this traffic into the DMZ, not the LAN? - Don On 5/24/05, Don Munyak <don dot munyak at gmail dot com> wrote: > Got my Vonage adpter in. It actually a Linksys RT31P2-VD, Broadband > Router with 2 phone lines. Setting it up was a breeze. Baiscally > plugged the WAN port into an existing switch port, turn it on, then > plugged the phone in. That's it. > > I am seeing some blocked UDP traffic though. > The first number in each line is the number of packets logged for that > given time. > 12 22:27:51.145365 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 50 22:27:50.145846 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 50 22:27:49.145791 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 50 22:27:48.145655 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 50 22:27:47.146971 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 50 22:27:46.146651 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > 25 22:27:45.656988 WAN 216.115.25.40, port 12534 68.57.164.XX, port 10110 UDP > > I also notice a few other Vonage Source IP's using roughly the same port number. > I gues I'll do some searching at Vonage to see what ports I need to allow in. > > btw... > > ----CM----m0n0wall----switch------LAN > | > |-----------Linksys----Phone > > On 5/22/05, Jim Spaloss <jspaloss at gmail dot com> wrote: > > I am running Packet 8 service on a 8x8 DTA310 behind m0n0wall (1.1). > > Traffic shaping is on and I have no problems. > > > > Thanks, > > Jim > > > > On 5/20/05, David Lawley <dlawley at gmail dot com> wrote: > > > For what its worth, I just had the default shaping turned on and tried > > > Sipphone (software) and it would not work, had to disable traffic > > > shaping for it to work for me.. I suppose a rule might be needed but > > > have not got that far into it yet.. > > > > > > > > > On 5/19/05, Don Munyak <don dot munyak at gmail dot com> wrote: > > > > Greetings, > > > > > > > > I just purchased a subscription with Vonage VoIP. I have m0n0wall > > > > 1.2b7 running at home. Since I have not yet worked with VoIP or > > > > traffic shaping, I am looking for some advice or recommendations. > > > > > > > > Like I said I am running 1.2b7 but I have no objections to downgrading > > > > if recommended. > > > > As for traffic shaping...does anyone have a "how-to" or a good read ? > > > > And/Or any personal experiences you might like to share to lessen the > > > > bumps in the road. > > > > > > > > Thanks, > > > > > > > > - Dopn > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > > > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > > > > |