[ previous ] [ next ] [ threads ]
 
 From:  "Christian Oswald" <coswald at dls dot net>
 To:  "m0n0wall list" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Vonage recommendations
 Date:  Wed, 25 May 2005 08:05:19 -0500
Only problem is that monowall does not support TFTP through NAT (unless
it's 1:1). You'll find it hard getting tftp updates. I'm still trying to
find somebody to make that fix to monowall (NATD maybe or something).
Like I said, I'm willing to pay someone for the fix.

Christian
 
-----Original Message-----
From: Don Munyak [mailto:don dot munyak at gmail dot com] 
Sent: Tuesday, May 24, 2005 10:16 PM
To: m0n0wall list
Subject: Re: [m0n0wall] Vonage recommendations

Just found this link

http://www.vonage.com/help_knowledgeBase_article.php?article=452

Do you suppose it would be better to just put an opt-1 interface on
the firewall and allow this traffic into the DMZ, not the LAN?

- Don

On 5/24/05, Don Munyak <don dot munyak at gmail dot com> wrote:
> Got my Vonage adpter in. It actually a Linksys RT31P2-VD, Broadband
> Router with 2 phone lines. Setting it up was a breeze. Baiscally
> plugged the WAN port into an existing switch port, turn it on, then
> plugged the phone in. That's it.
> 
> I am seeing some blocked UDP traffic though.
> The first number in each line is the number of packets logged for that
> given time.
>  12 22:27:51.145365 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  50 22:27:50.145846 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  50 22:27:49.145791 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  50 22:27:48.145655 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  50 22:27:47.146971 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  50 22:27:46.146651 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
>  25 22:27:45.656988 WAN 216.115.25.40, port 12534 68.57.164.XX, port
10110 UDP
> 
> I also notice a few other Vonage Source IP's using roughly the same
port number.
> I gues I'll do some searching at Vonage to see what ports I need to
allow in.
> 
> btw...
> 
> ----CM----m0n0wall----switch------LAN
>                                   |
>                                   |-----------Linksys----Phone
> 
> On 5/22/05, Jim Spaloss <jspaloss at gmail dot com> wrote:
> > I am running Packet 8 service on a 8x8 DTA310 behind m0n0wall (1.1).
> > Traffic shaping is on and I have no problems.
> >
> > Thanks,
> > Jim
> >
> > On 5/20/05, David Lawley <dlawley at gmail dot com> wrote:
> > > For what its worth, I just had the default shaping turned on and
tried
> > > Sipphone (software) and it would not work, had to disable traffic
> > > shaping for it to work for me..  I suppose a rule might be needed
but
> > > have not got that far into it yet..
> > >
> > >
> > > On 5/19/05, Don Munyak <don dot munyak at gmail dot com> wrote:
> > > > Greetings,
> > > >
> > > > I just purchased a subscription with Vonage VoIP. I have
m0n0wall
> > > > 1.2b7 running at home. Since I have not yet worked with VoIP or
> > > > traffic shaping, I am looking for some advice or
recommendations.
> > > >
> > > > Like I said I am running 1.2b7 but I have no objections to
downgrading
> > > > if recommended.
> > > > As for traffic shaping...does anyone have a "how-to" or a good
read ?
> > > > And/Or any personal experiences you might like to share to
lessen the
> > > > bumps in the road.
> > > >
> > > > Thanks,
> > > >
> > > > - Dopn
> > > >
> > > >
---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > > >
> > > >
> > >
> > >
---------------------------------------------------------------------
> > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > >
> > >
> >
> >
---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> >
>

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch