On 5/25/05, Marco Fandel <fandelmarco at yahoo dot de> wrote:
> Hello,
> 
> I already tried this in Release 1.1, now I'm using 2.3... Same Problems :-(
> 
> So what I got is the following:
> 
> Internet - ADSL Router (PC1) - Monowall - Hub (PC2)
> 
> The ADSL Router is a Zyxel Prestige 600 including WLAN
>   subnet: 192.168.1.0/24
>   Ip: 192.168.1.1
> 
> m0n0wall 2b3:
>   WAN: 192.168.1.2 Gateway: 192.168.1.1 (disabled private blocking switch)
>   LAN: 192.168.2.1
>   Rules: open ANYTHING IN and OUT (for testing purposes...)
> 
> Hub subnet: 192.168.2.0/24
> 

You can't do this as is because NAT is enabled by default.  In this
scenario you don't need it.  Enable advanced outbound NAT without any
entries and everything will work fine.

-Chris