Seth tx for hint. 

That is all I want to know. I solve my connection with m0n0wall 1.2b7
without any problems. If is somebody interested in my HW config, here is it:
Compaq DESKPRO C400/64MB/6.4GB with Intel LAN Onboard and additional 3COM905
and Realtek 8193 for OPT + ADSL (4M-DW / 0.7M-UP) 

Cheers,

Andrej

-----Original Message-----
From: Seth Martin [mailto:SethM at turbinegenerator dot com] 
Sent: Thursday, May 26, 2005 5:05 PM
To: Andrej Fercic; m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] MultiNAT

Do you want full access or restricted access for the IP?  Under Server NAT
(Firewall>Nat>ServerNAT tab) I added the IP's, then under the
Services>Proxy ARP I added my IP range...

Now I add under inbound under Firewall>Nat the rules I want per protocol so
that only services I want are exposed.

-----Original Message-----
From: Andrej Fercic [mailto:andrej at pcklinika dot si]
Sent: Thursday, May 26, 2005 10:28 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] MultiNAT

Tx, but 1:1 nat does not work.

Cheers,

Andrej