[ previous ] [ next ] [ threads ]
 
 From:  Chris Buechler <cbuechler at gmail dot com>
 To:  Adam Hawkins <hawkos at tpg dot com dot au>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] I have a Dynamic IP from my ISP TPG internet. Heellppppp!
 Date:  Tue, 31 May 2005 10:23:56 -0400
On 5/31/05, Adam Hawkins <hawkos at tpg dot com dot au> wrote:
> 
>  I just cannot access the internet from my client PC
> 192.168.2.100 through my LAN 192.168.2.1 which then goes to the WAN (I hope)
> 192.168.1.5 and unfortunately, to make matters worse, I have a Dynamic IP
> from TPG internet.
> 
> 
> 
> I have read the manual from cover to cover more than a dozen times.  I have
> added rules, deleted rules, left monowall at it's default settings etc etc.
> I am using a Dynalink RTA100+ ADSL modem and it has a setting within it's
> own WebGUI that allows you to set it up as a DHCP Server/Relay???.  TPG
> internet uses PPPoE and I am confused as to which gateway address I should
> use.
> 

Sounds like you have everything right but one thing.  You should be
able to set your modem to bridge only, and not do any PPPoE.  Then
setup the m0n0wall WAN for PPPoE using the username/password info from
your ISP.  Then everything should work fine if the modem is bridging
appropriately.

-Chris