[ previous ] [ next ] [ threads ]
 
 From:  =?iso-8859-2?Q?Peter_Parni=E8an?= <peter at procad dot sk>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] MODE_SENSE_BIG :: Hardware problem ?
 Date:  Mon, 13 Jun 2005 17:39:46 +0200
Problem was with IDE cables. Just set HDD to primary master and CD-ROM to 
Seconadary Slave and its working great!

peter

----- Original Message ----- 

To: "Brian" <bri at sonicboom dot org>; <m0n0wall at lists dot m0n0 dot ch>
Sent: Monday, June 13, 2005 4:55 PM
Subject: Re: [m0n0wall] MODE_SENSE_BIG :: Hardware problem ?


..its really strange, i tryed install m0n0 to HDD, but im getting this
message: HDD is biger than 800MB,
overwrite check..pls. select another drive.. but i know my hdd is bigger
than 800MB (its 2.5GB)

...same if i use [-u] parameter...

And if i use CD-ROM, hdd is out off PC and there is just CD-ROM and flopy...
..and still have message with ata0 problem :-) funny - but strange :-)

...no idea whats wrong, im gonna try play with BIOS...

peter

----- Original Message ----- 
From: "Brian" <bri at sonicboom dot org>

Sent: Monday, June 13, 2005 4:36 PM
Subject: Re: [m0n0wall] MODE_SENSE_BIG :: Hardware problem ?




>Hi guys,
>i alredy have 4m0n0 boxes and all of them are runnig without problem but im
>trying to install m0n0 b8 to PC-CDROM, 800MHz Celeron/ 256MB-RAM and im
>getting this message:
>
>acd0: MODE_SENSE_BIG command timeout - resetting
>ata0: resetting devices...done
>
>and this is repeating...
>
>Any idea whats wrong?
>
>Thanks, peter
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
Not sure if you knew this or not, you made no indication of what you had
tried.  ata0 would be a hard drive controller/disk issue??

Brian



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch