|
||||||||||
pcengines, the vendor of the wrap, has cheap cf-adapters too: http://pcengines.ch/cflash.htm look at http://pcengines.ch/order.php for distributors near you and prices. Holger -----Ursprüngliche Nachricht----- Von: Joe Lagreca [mailto:lagreca at gmail dot com] Gesendet: Dienstag, 14. Juni 2005 05:12 An: Vinc Duran Cc: Tom Anderson; m0n0wall at lists dot m0n0 dot ch; don dot munyak at gmail dot com Betreff: Re: [m0n0wall] Rack Mount m0n0wall - Michael Bachmann I recently replaced my IP110 HD's with CF cards. I used this adapter: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5200093319 or they can also be found here: http://www.mini-box.com/s.nl/sc.8/category.14/it.A/id.182/.f http://www.packetgods.com/store/product_info.php?products_id=64 http://siliconkit.dnsalias.com/ There were a perfect replacement, down to the mounting holes, which were the same location and size as the HD moutning holes. They work perfect. Joe On 6/13/05, Vinc Duran <uberpfloyd at gmail dot com> wrote: > Here's a CF adapter question. > I looked around on froogle for an adapter to use with the IP330 I just > bought on ebay and I'm wondering if you guys can make any specific > recommendations. > There's this $9 adapter > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6768397440&category=41994 > and there are various adapters of different sizes and shapes in the > $13 neighborhood. Then of course there are these nice looking PSI > adapters http://www.psism.com/adcf.htm that I don't see cheap > anywhere. > Do you happen to have any specifics on what's worked or what hasn't worked? > Thanks for your time, > Vinc > > On 6/7/05, Tom Anderson <tom at haremail dot net> wrote: > > I built mine based on a Nokia IP330. It's a 1U rackmount case with an AMD > > 266MHz processor, 128MB of RAM, no video card (or provision for a video > > card) and no keyboard/mouse connectors. It has 3 built-in, front-facing > > 10/100 NICs and comes with an 8GB Western Digital hard drive, which I > > replaced with a 64MB CF card and adapter. It works beautifully. I have seen > > plenty of these same boxes for sale on ebay for well under $100. I got mine > > for free from somebody who was clearing out a bunch of older equipment. > > > > > > ----- Original Message ----- > > From: "Daniel L. Hunter" <dhunter at techmethods dot com> > > To: <m0n0wall at lists dot m0n0 dot ch> > > Sent: Tuesday, June 07, 2005 6:45 PM > > Subject: [m0n0wall] Rack Mount m0n0wall - Michael Bachmann > > > > > > >I was just looking at the m0n0wall gallery on the website and noticed a > > >rack mount case using a Soekris net4501 created by Michael Bachmann: > > > > > > http://www.m0n0.ch/wall/gallery/michael_bachmann/m0n0wall.jpg > > > > > > Michael, if you're on this list, can you provide some info on your rack > > > mount m0n0wall? That's exactly what I'd like to build. > > > > > > Anybody else built something like this? Any suggestions on the rack mount > > > case? Is that custom or off the shelf? Has anybody done this with a Warp > > > board? > > > > > > Thanks, > > > > > > Danny > > > > > > -- > > > > > > ******************************************** > > > Daniel L. Hunter > > > TechMethods, LLC > > > (p) 304-876-9103 > > > (f) 304-876-9203 > > > http://www.TechMethods.com > > > dhunter at TechMethods dot com > > > ******************************************** > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch ____________ Virus checked by G DATA AntiVirusKit |