Re: [m0n0wall] help with setup of m0no and external dsl router

From:	Laurent FASNACHT <lf at o dash t dot ch>
To:	Chris Buechler <cbuechler at gmail dot com>
Cc:	"Jared Patterson (DSL AK)" <JaredP at datacom dot co dot nz>, m0n0wall at lists dot m0n0 dot ch
Subject:	Re: [m0n0wall] help with setup of m0no and external dsl router
Date:	Mon, 20 Jun 2005 06:46:55 +0200

Chris Buechler a écrit :

>On 6/19/05, Jared Patterson (DSL AK) <JaredP at datacom dot co dot nz> wrote:
>  
>
>>Hi Chris,
>>
>>The gateway on the wan is set to 192.168.2.200, which is the ip of the
>>dsl router. Sorry to be a pain, but im kinda new to all of this. Am I
>>missing some other setting / service which I have not enabled?
>>
>>By default, will lan traffic get internet access etc from wan with no
>>rules enabled?
>>
>>    
>>
>
>That sounds fine.  Can you ping 192.168.2.200 from m0n0wall? 
>(Diagnostics->Ping page)  This should work as you intend without
>changing any rules, NAT settings, etc.  Just setup LAN and WAN IP info
>and roll.
>  
>
Don't forget to turn off "Block private networks" on the WAN interface.

Best regards,

Laurent