[ previous ] [ next ] [ threads ]
 
 From:  "Paul Rae" <PRae at aminocom dot com>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Using m0n0 with an external dsl router
 Date:  Wed, 22 Jun 2005 11:16:58 +0100
Your WAN and LAN subnets conflict.
 
Move your LAN subnet to a different range and ait should fix most of your issues.

-----Original Message-----
From: Jared Patterson (DSL AK) [mailto:JaredP at datacom dot co dot nz]
Sent: 22 June 2005 10:14
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] Using m0n0 with an external dsl router


Hi All,
 
I Have setup another little lan trying to get m0n0 to work in my current setup. All hardware in this
setup is relatively the same other than the dsl router is the model below, Dynalink RTA 220. Heres
the current setup;
 
Internal Lan - 10.1.1.0/8
 
M0n0 Lan - 10.1.1.201
 
M0n0 Wan - 10.1.20.1
 
DSL Router - 10.1.20.200
 
DSL Router currently running DHCP which assigned 10.1.20.1 to Wan.
 
PC in Internal Lan is currently on a static setup with 10.1.1.201 set as the gateway. Dont know what
is going wrong as just before this setup, I installed Smoothwall which was setup exactly the same,
and ran with no errors. Although smoothwall kinda sucks, would be wicked to get m0n0 running. 
 
Attached is the status.php as im out of ideas. Any help would be greatly appricated.
 
Cheers
 
Jared