|
||||||||
Likewise I have the dlink dfe-570TX working perfectly in my m0n0wall box and pfsense box. I also had a dual port compaq thunderlan card that worked perfectly too, but got hot enough to cook eggs on. -----Original Message----- From: Paul Rae [mailto:PRae at aminocom dot com] Sent: Thursday, 23 June 2005 5:08 a.m. To: m0n0wall at lists dot m0n0 dot ch Subject: RE: [m0n0wall] m0n0wall on a WatchGuard Firebox v80? Not sure about the Watchgaurd nic, but i have used the D-Link DFE-580TX Quad card without any issues http://linitx.com/product_info.php?cPath=65&products_id=393 -----Original Message----- From: Daniel Foster [mailto:dan at melbourne dot co dot uk] Sent: 22 June 2005 08:12 To: Chris Knight; m0n0wall at lists dot m0n0 dot ch Subject: RE: [m0n0wall] m0n0wall on a WatchGuard Firebox v80? Hi Chris, I don't know the answer to the question about the watchguard 4 port nic, I was wondering the same myself, we have four Watchguard fireboxes, which are about to be replaced with m0n0walls (amazing that a "free" piece of software is more feature-rich than firewalls that costs thousands). I recently picked up a number of these: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=5777740903&ssPageN ame=STRK:MEWN:IT Tested them with my m0n0wall test box and they worked great (infact I had three of them in one pc at one point, and it picked up all 12 ports very happily!) Hope this helps - as I say I don't know if the watchguard custom card will ever work, I suspect the answer would be that it's probably not worth the hassle if you can swap it out for a "standard" 4 port card... Dan -----Original Message----- From: Chris Knight [mailto:boheme at gmail dot com] Sent: 22 June 2005 08:03 To: m0n0wall at lists dot m0n0 dot ch Subject: [m0n0wall] m0n0wall on a WatchGuard Firebox v80? I recently picked up a WatchGuard FireBox V80 from someone who had given up on their expensive support. I popped the case and it appeared to be a x86 based mini-pc with a custom 4-port PCI ethernet card. It boots off CF, so I figured I'd see what happened if I tried to boot it off a m0nowall image. Initial boots were spotty, with semi-random crashes with errors such as "Fatal trap 1: privileged instruction fault while in kernel mode", "Fatal trap 12: page fault while in kernel mode", "Fatal trap 9: general protection fault while in kernel mode", and "Fatal double fault:". Rarely the same error twice in a row. First things first, slim down. I removed the 4-port PCI network card. Boot errors went away. It appears to recognize the dual ethernet ports on the MB, so I have a nice m0nowall based firewall now. It would be nice to have those additional 4 ports though. Has anyone ever encountered the "4-PORT Rapidcard_SBC" PCI ethernet controller that is inside the WatchGuard FireBox V80? I tried dropping it into a FreeBSD 5-STABLE box with a GENERIC kernel and it failed to be detected properly. I can post pictures if anyone is curious as to what it looks like. If this card is completely unworkable due to being custom built for WatchGuard, can anyone suggest a decent multi-port PCI ethernet controller that works with m0n0wall? -Chris -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.7.9/23 - Release Date: 20/06/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.7.9/23 - Release Date: 20/06/2005 --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |