|
||||||||
Everything works great from the LAN side getting out to the Internet and pinging other machines on the network in different subnets but I cannot ping anything on any interface except the WAN from outside of m0n0wall. My firewall rules are as follows: WAN * * * LAN * * * OPT1 * * * I have also tried just allowing UDP, ICMP, and TCP but the firewall log still shows blocking UDP, ICMP, and TCP requests. Network as follows for test setup. 192.168.1.30 Linksys Router/AP DHCP 192.168.1.100-150 192.168.1.104 DHCP from Linksys WAN on m0n0wall. This is just for testing. 192.168.2.1 LAN IP 192.168.2.10 LAN IP Computer. Gets out fine, pings everything fine. 192.168.1.103 My Laptop I have additionally also tried OPT1 as a bridge with a LAN computer connected under the same subnet as the Linksys Router with no luck either. It is as if the firewall is not accepting anything I input into it. Anyone with any other luck? -----Original Message----- From: stefan underscore rath at web dot de [mailto:stefan underscore rath at web dot de] Sent: Sunday, August 07, 2005 5:21 AM To: m0n0wall at lists dot m0n0 dot ch Subject: Re: [m0n0wall] loking to email myself when public ip changes Am Sonntag, 7. August 2005 04:55 schrieb Chris Buechler: > On 8/6/05, Adrian <selage at sbcglobal dot net> wrote: > > I am gonna be setting up mono on a ip that will be dynamic, is there a > > way to get a email telling me the new ip address?? > > not built in. Why not just use dyndns of some sort? > > -Chris > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch -- wget http://checkip.dyndns.org/ -- to see your external ip-adress Stefan --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |