[ previous ] [ next ] [ threads ]
 
 From:  Bill McDonald <alterac at gmail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Cc:  Don Munyak <don dot munyak at gmail dot com>, Matt Groener <MGroener at line6 dot com>
 Subject:  Re: [m0n0wall] Display CPU Temperature.
 Date:  Wed, 10 Aug 2005 13:49:05 -0600
Well what about pulling the info from acpi? or using sysctl?
hw.acpi.thermal
or
hw.sensors

I use a standard PC motherboard, Tyan Mobo with a Celeron 1200

On 8/10/05, Matt Groener <MGroener at line6 dot com> wrote:
> You could look and see if this data is extractable via SNMP for your
> host. Some machines have the hardware and some don't, and some SNMP
> implementations expose this data, and some don't. Most are hardware
> specific. What type of hardware are you using?
> 
> -matt
> 
> 
> On Aug 10, 2005, at 12:34 PM, Don Munyak wrote:
> 
> >> Is their any way to display the CPU temperature on the CPU Usage
> >> page?
> >> Or just display the CPU Tempurature?
> >>
> >
> >
> > This has been asked before and if memory serves me, there would need
> > to be a config file available for every possible board that m0n0wall
> > runs...which is not feasible.
> >
> > but I could be wrong
> >
> > - Don
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> >
> 
>